Pedestal System

Pedestal System

<-Back to Product Page

For Purchasing Information or Finding the Correct Pedestals For Your Project Please Call: (800) 550-3325 or email: support@coverdeck.com

 

Snapjack

Elevated Interlocking Corner Connectors

(For Use with Coverdeck Systems® Wood and Porcelain Structural Panels)

Top View

(Disconnected)

Side View

 

Bottom View

(Connected)

Specifications

Diameter - 5-5/8"

Height - 1/2"

Static Load - 8,800 lbs

Support - Surface supported by 64 Legs

Locks - 16 latch locks; 4 sides w/2 male Parts; 4 sides w/2 female parts

Flammability - Meets UL94-HB standards

Material - High Impact Polypropylene

Fungus & Mildew Resistant - Yes

Service Range - -30° to +170°

  

Tensile Strength (psi) - ASTM D638 5300 

Flexural Modulus -  (105 psi, 73° F) ASTM D7901.6

Tensile Modulus -  (105 psi) ASTM 638…82

Specific Gravity - ASTM D792...093

Specific Volume - In3/lb.…30.5

  

Electrical Specifications 

ARC Resistance, -  SEC. ASTM D495…50

Dielectric Constant -  (1M Hz)…2.5

Dielectric Strength -  (Volts/Mil...660

  

Resistant to - Weak Acids, Weak Alkalis ,Strong Alkalis

 

*Comes Pre Assembled In 4 Connected Corners

 

 

Deckstone Porcelain Panel Application

 

 

Wood Strcutural Panel Application

 

 

 

*Click Image to Enlarge

 

 

 

Available Accessories

Protection Mat 3.2mm Thick 9in Diameter
Pastic Plug

(For Use with Wood Structural Panels)

Creates proper spacing and lock panels together

Screw & Washer

(For Use with Wood Structural Panels)

Provides increased windlift support

Polyurethene Adhesive

(For Use with Porcelain Panels)

Creates bond between Snapjack and Porcelain Panels 

 

 


Hercules Screwjack Pedestal

 

*Hercules Screwjack Pedestal with shim

The Hercules Pedestal System is designed to provide an durable support for a raised surface. This system can provide noise reduction along with improved drainage and precise joint spacing. Minimal maintain cost is required with Hercules Screwjack Pedestal because of easy access underneath. Beautiful and precisely elevated spaces can be created on roofs, plazas, and many more spaces.

Pedestal Parts Height Height in mm
E0 T0 , B0 1.375" to 2" 35-50 mm
E1 T1 , B1 2" to 3" 50-75 mm
Proper 3 Thread Insertion Will Reduce Max By 3/4" / 19mm
E2 T2 , B2 2 3/4" to 4 3/4" 70-120 mm
E3 T3 , B3 4 3/8" to 7 3/4" 111-196 mm
Proper 3 Thread Insertion Will Reduce Max By 1 1/2" / 38mm
E2C T2 , C , B2 5 1/2" to 9 1/4" 140-235 mm
E3C T3 , C , B3 8 1/4" to 12" 209-304 mm
E3CC T3CCB3 10 3/4" to 16" 273-406 mm
For heights above 16 inches call for special wire bracing under most conditions
Bearing Capacity All 1984 lbs. 900 kg
Base Diameter 8.11" Base Surface Area 51.66 in^2
Rubber Shims 1 mm or 2 mm Also adds grip
Slope Corrector 2% or 3% Recommend
Spacer Tab joints too small for cigarettes
Height/Thickness   1" (25mm)

1/8" 3/16"

 

*Slope Corrector

Pedestal Table PDF


 

 

Atlas Rubber Pedestal

 

*Atlas Rubber Pedestal with Shim

 

Flexible rubber pesdestals can accommodate the subtle freeze thaw expansion which most often occurs with concrete pavers while at the same time protecting the materials below.

Composition: SBR Rubber

Shore Hardness: 80 (Approximate.)

Product Length Width Thickness
Pedestal 5 1/2" 5 1/2" 3/8"
Shim 5 1/2" 5 1/2" 1/16"
Tapered Pad 5 1/2" 5 1/2" 1/16"

 

 

 

Apollo Plastic Pedestal

 

*3 Stacked Apollo Pedestals

This lightweight stackable and reusable pedestal can ensure improved drainage, and precise consistent joint spacing.

Composition: High Density Polypropylene

Low-Temp. Brittleness (ASTM D 748) -96 F

Softening Temperature (ASTM D 1525) 260 F

 

Model Diameter Height Spacer Width
P4 4 1/2" 5/8" 3/16"
Shims 4 1/2" 1/8" NA
  4 1/2" 1/4" NA


 

 

 

Adonis Plastic Pedestal

 
 
 
 
 
 
 
 
These plastic pedestal provide and ensure improved drainage along with precise and consistent joint spacing.

Composition: High Density Polypropylene

Model Diameter Height Spacer Width
S14 6" 1/2" 1/8"
S18 6" 3/4" 1/8"
S23 6" 7/8" 1/8"

 

 

 

Deckwise

 

 

 

 

Deckwise tile connectors have a unique design to eliminate the worry of loose or uneven gaps between tiles. 

 

Deckwise Specifications
Deck Connector 5 3/4" x 5 3/4" x 7/8"
Base Plate Thickness 1/4"
Spacer Thickness x Width 1/4" x 3/16"

Made in the USA these deck tile connectors make installation eaiser for decking panels.

 

 
 
 

Eterno Self-Levelling Pedestal

SE0 Self-leveling pedestal: justify a 5% slopes 28 - 38mm 1 2/16 - 1 8/16in
SE1 Self-leveling pedestal: justify a 5% slopes 37.5 - 50mm 1 8/16 - 1 3/16in
SE2 Self-leveling pedestal: justify a 5% slopes 50 - 75mm 1 3/16 - 2 5/16in
SE3 Self-leveling pedestal: justify a 5% slopes 75 - 120mm 2 5/16 - 4 11/16in
SE4 Self-leveling pedestal: justify a 5% slopes 120 - 170mm 4 11/16 - 6 11/16in
SE5 Self-leveling pedestal: justify a 5% slopes 170 - 215mm 6 11/16 - 8 7/16in
SE6 Self-leveling pedestal: justify a 5% slopes 140 - 230mm 5 8/16 - 9 2/16in
SE7 Self-leveling pedestal: justify a 5% slopes 185 - 275mm 7 5/16 - 10 13/16in
SE8 Self-leveling pedestal: justify a 5% slopes 235 - 325mm 9 5/16-12 13/16in
SE9 Self-leveling pedestal: justify a 5% slopes 205 - 345mm 8 2/16-13 10/16in
SE10 Self-leveling pedestal: justify a 5% slopes 250 - 385mm 9 -15 3/16in
SE11 Self-leveling pedestal: justify a 5% slopes 300 - 400mm 11 13/16 -15 11/16in
SE12 Self-leveling pedestal: justify a 5% slopes 270 - 455mm 10 10/16 - 17 15/16in
SE13 Self-leveling pedestal: justify a 5% slopes 315 - 500mm 12 6 /16 - 19 11/16in
SE14 Self-leveling pedestal: justify a 5% slopes 365 - 550mm 14 6/16 - 21 11/16in
PROLUNGA

Estension for SE: suitable only from SE3 to SE14

   
3515 XL Head for SE Pedestal    
3519 head locking latch for SE    
LGH2 Rubber Shim. Non slip and anti noise 2mm  
LGH3 Rubber Shim. Non slip and anti noise 3mm  

 

EH Support

EH12 Tabs: 8mm height / 2.5mm thickness
EH11 Tabs: 11mm height / 3mm thickness
EH15 Tabs: 12mm height / 3mm thickness
EH20 Tabs: 18mm height / 4mm thickness
LH3 rubber shim a 150mm

 

Star Support

STAR.T Self-leveling pedestal: justify a 5% slopes 10-15mm
STAR.B Self-leveling pedestal: justify a 5% slopes 5mm

 

Accessories

3502 Regulation Key - 4mm
MO3600 Lifting clamp 60x60
MO3400 Lifiting clamp 40x120
MO30200 Lifting clamp 20x120
3511 Draining clip
3507 Perimeter block system
3508 Wall spring - for 2cm thickness
3509 Wall spring - from 2.6 to 3.3 cm thickness
3559 Aluminium joist 60x20mm section - L 2000mm
3560 2cm sliding head 
 

 

 

Hanover Pedestal System

Specifications

High-Tab® Pedestal

7” across flats, 5/8” thick, 1/8” spacers • for heights 5/8” up to 2

Compensator® Leveling System

7 3/4” diameter, 1/2” thick • can be used under the Elevator® System to compensate for roof slope

Leveling Shims

7” across flats black : 1/16” thick, white : 1/8” thick • can be used on top of the Elevator® System for final leveling adjustments

Guardian® Paver System

Top Plate: 6” sq, Bolt: 3/4” diameter Base: 7 1/2” diameter •can be used on top of the Elevator® System; for wind uplift resistance

 

 

Elevator Pedestal Heights

2” Base & Top 2” - 3” 3” Base & Top 3” - 4 3/4”  4” Base & Top 4 3/4” - 7 3/4”
3” Base, 4” Top & Coupler 7 3/4” - 10” 4” Base, 4” Top & Coupler 9” - 12 4” Base, 4” Top & 2 Couplers 12” - 16”*